Courses

OVER 40 TRAINING COURSES

Filter:

Categories:
GENERAL COURSES
Location:
GENERAL COURSES
Our Earthmoving Training package is designed to make you ready or up-skilled for the construction industry. This course combines practical experience and theoretical knowledge in small class sizes at one of our industry training sites, allowing for efficient learning of skid steer loader machine operating skills. Elevate your expertise in earthmoving operations and prepare for success.
Our Earthmoving Training package is designed to make you ready or up-skilled for the construction industry. This course combines practical experience and theoretical knowledge in small class sizes at one of our industry training sites, allowing for efficient learning of multiple machine operating skills. Elevate your expertise in earthmoving operations and prepare for success.
Our Earthmoving Training package is designed to make you ready or up-skilled for the construction industry. This course combines practical experience and theoretical knowledge in small class sizes at one of our industry training sites, allowing for efficient learning of excavator and wheeled front end loader machine operating skills. Elevate your expertise in earthmoving operations and prepare for success.
Our Earthmoving Training package is designed to make you ready or up-skilled for the construction industry. This course combines practical experience and theoretical knowledge in small class sizes at one of our industry training sites, allowing for efficient learning of excavator and skid steer loader operating skills. Elevate your expertise in earthmoving operations and prepare for success.
Our Earthmoving Training package is designed to make career switchers and new entry professionals ‘Job Ready’ for the construction industry. This course combines practical experience and theoretical knowledge in small class sizes at one of our industry training sites, allowing for efficient learning of multiple machine operating skills. Elevate your expertise in earthmoving operations and prepare for success.
ACE Training has got you covered when you are looking to refresh or improve your current skill set. In this traffic management refresher course, you will be updated on traffic control and management: using a stop-slow bat and implementing traffic management plans safely and following workplace policies and procedures. You can apply this skill set in a wide range of industries.

IMPORTANT NOTE: Effective 1st March 2024, this course is only suitable for Traffic Controllers NOT working for a Traffic Control company.
The Certificate III in Civil Construction (General) prepares you for a career in the rapidly growing world of civil construction. This 14-week* course covers a broad range of topics, including working at heights, confined space, traffic control, traffic management, operate a roller, excavator, front end load, backhoe and more.
A Skid Steer Loader is one of the most commonly used machines on construction sites. Get your skid steer certificate of competency with ACE Training so you can drive one! Our world-class instructors will ensure you have the right skill and technical knowledge to operate a skid steer loader – from conducting pre-checks to machine maintenance.
If you are working in construction and want to upgrade your skills, or if you are seeking work in the industry, the Conduct Rigid Haul Truck Operations Course can be the course for you. Together with the knowledgeable trainers of ACE Training, learn the fundamental theory and practical skills to operate a rigid haul truck successfully.
If you are working in construction and want to upgrade your skills, or if you are seeking work in the industry, the Conduct Telescopic Materials Handler Operations course is for you. Learn the fundamental theory and practical skills to operate as telescopic materials handler in the Construction, Mining Resources and Infrastructure Industries.
Broaden your career choices in the lucrative civil construction industry with ACE Training’s Dozer course. Here, you’ll learn the proper training to operate a dozer, relocate a dozer, maintain the machine and other skills needed to be a top-notch dozer driver. Once you finish the course, you’ll be one step closer to landing that construction job that you want.
A roller is one of the most common machines on any construction site. If your goal is to drive one of these rollers, ACE Training’s Roller course is the one for you. Get the statement of attainment that you need to safely and efficiently operate the machine through the help of ACE’s qualified instructors. They will ensure you have the skills and knowledge to complete this course.
Widen your job options in civil construction with ACE Training’s Tractor course. This course will teach you how to plan and prepare tractor operations, conduct tractor pre-operational checks, and operate the machine.
Do you want to upgrade your career in construction? Learn how to operate a tip truck safely, efficiently and proficiently in this practical and comprehensive course. Upon completion of this course with our ACE Training trainers, you’ll be equipped with the knowledge and know-how to operate a tip truck in construction.
Jumpstart your career in civil construction with ACE Training. Learn how to safely and effectively operate a grader in this comprehensive course. When you finish this course, you’ll be equipped with the knowledge and the certificate to work with the construction, transport, agriculture and mining industries. With our qualified ACE Training instructors, you’ll learn the principles, practical skills and recommended techniques to operate a grader safely and effectively.
Learn how to use a backhoe or loader safely in this comprehensive course. When you finish this course, you’ll be equipped with the knowledge and the certificate to operate a backhoe or loader in the construction, transport, agriculture and mining industries. With our qualified ACE Training trainers, you’ll learn the principles and the practical skills and recommended techniques to operate construction equipment safely and effectively.
If you want a career in driving a heavy rigid vehicle, and want to upgrade your truck licence, then ACE Training’s Heavy Rigid Licence is the course for you. Learn how to efficiently and safely control all vehicle functions required by VicRoads. This truck licence will allow you to drive a heavy rigid vehicle 8 tonnes GVM or above with 3 or more axles. Our trainers will provide a personal one-on-one lesson on your choice of Automatic or Non-Synchro Trucks.
You’ll learn how to drive and operate a heavy combination vehicle safely and effectively with this course. A heavy combination vehicle can be a prime mover, single semi-trailer, or rigid vehicle with a trailer weighing more than 9 tonne GVM. This course will teach you to control all vehicle functions, monitor the vehicle’s performance, and how to couple and uncouple a trailer.
Upgrade your licence to a Medium Rigid Licence with ACE Training. Our experienced trainers will give you the theory, skills, and experience to operate a medium rigid truck in this course. This licence will allow you to drive any 2 axle rigid vehicle greater than 8 tonnes GVM.
This course focuses on defensive driving techniques that emphasise low risk and hazard management strategies for everyday driving, off road driving and off road four wheel drive recovery techniques with practical skills in remote location, survival techniques and use of communication equipment. This course is only conducted for Company group training.
A spotter is a safety observer responsible for ensuring the safety of workers operating in the vicinity of underground and overhead electric lines. Our spotting course will prepare you to perform your job as a spotter and ensure safe working conditions in various field settings. A combination of theoretical and practical sessions will equip you with the qualifications you need.
Maintaining adequate breathing and circulation in the first two minutes following an arrest is crucial to ensuring survival. With the proper knowledge of how to administer cardiopulmonary resuscitation or CPR, you can save a life in the event of an emergency. ACE Training will make sure that you are ready to respond in the event of a crisis in any setting.
Providing first aid is an essential skill in any setting. ACE Training provides first aid training that you can apply in any emergency. Enrolling in our first aid training can prepare you for emergencies at work and in your personal life.
Workers who deal with chainsaws need to have the proper training to handle equipment on-site safely. ACE Training can help you gain the qualifications you need to increase your employability in the construction sector. Our chainsaw handling course covers two parts – FWPCOT2254 and FWPCOT2259 over two days.
Working in confined spaces takes skill and knowledge. Under current state regulations, you must undergo training if your job entails working in this high-risk environment. When you enrol in our RIIWHS202E course, you will gain the qualifications you need to perform your job safely and efficiently in confined spaces.
ACE Training has got you covered whether you’re looking to change careers or improve your current skill set. In this traffic management course, you will be trained in traffic control and management: using a stop-slow bat and implementing traffic management plans safely and following workplace policies and procedures. You can apply this skill set in a wide range of industries.

IMPORTANT NOTE: Effective 1st March 2024, this course is only suitable for Traffic Controllers NOT working for a Traffic Control company.
If your job requires you to work at heights, you need to be equipped with the skills and knowledge necessary to ensure the safety of yourself and your colleagues. ACE Training will provide you with the competency you need to work at heights with confidence and skill. Our training course will cover safety standards and work procedures for working at heights.
The most basic requirement to work in the civil construction industry is known as a ‘White Card’ issued by WorkSafe. The card is proof that you have the essential competencies to work safely on a construction site. Our training program will prepare you with the skills and knowledge that you need to make you work-ready for the construction industry.
To operate a vehicle loading crane weighing less than ten metric tonnes, you need to hold a current licence issued by WorkSafe authorities. Our instructors can help you acquire the knowledge you need to ace your certification. This course will walk you through the required competencies to operate a vehicle loading crane of less than ten metric tons.
Get certified with a TLILIC0024 licence by enrolling in ACE Training. ACE Training provides you with a training course that can help you gain your certification to operate a vehicle loading crane with a capacity of more than 10 meter tonnes. Our team of highly-skilled trainers will prepare you to optimise your skills in crane operations.
Upgrade your competency with a licence to operate a non-slewing mobile crane. ACE Training will equip you with the skills needed to operate a non-slewing mobile crane with a Rated Capacity (RC) exceeding 3 tonnes that incorporates a boom or jib. With ACE Training’s team of qualified trainers, you will get the qualifications you need to land that job.
Crane operation is an essential skill in many industries and proficiency in this can increase your employment opportunities, but it requires proficiency in precise, calculated manoeuvres. ACE Training will prepare you to safely and efficiently operate a mobile crane with Maximum Rated Capacity (MRC)up to 20 tonnes.
This course will allow you to operate a mobile crane with a Maximum Rated Capacity (MRC) up to 60 tonnes. If you have an active dogging licence, you can enrol in this course and train with the best crane operators in the industry. At the end of the course, you will be issued a WorkSafe notice of assessment (NOA) to apply for your job as a crane operator.
Amplify your skillset with a WorkSafe licence in Dogging Operations. From efficient slinging techniques to the best safety practices, ACE Training will equip you with the skills you need to achieve your accreditation with WorkSafe standards.
A certified rigger has to meet the National Standards for Licencing Persons Performing High-Risk Work. At ACE Training, our trainers can help you obtain the certification to perform rigging jobs such as operating ropes, cables, pulleys, and winches to move around materials and equipment on-site.
For people who want a career as a forklift operator, obtaining a licence to operate a forklift truck with ACE Training is a critical step toward making that dream come true. Enrol today to acquire the knowledge and skills needed to operate forklifts safely and effectively with our qualified assessors .
This course is designed for truck drivers looking to advance their careers with a more formal qualification. The course upgrades driving skills and teaches essential skills in fatigue management, load handling, route planning, and navigation with a nationally recognised training qualification.
The Certificate III in Civil Construction Plant Operations coursework allows you to apply a broad range of skills to develop qualifications toward the role of a skilled operator at a civil construction plant. With the array of skills mastered through this course, you will be prepared to contribute to infrastructure projects, collaborate with colleagues, and work on a range of major projects in the rapidly growing civil construction industry.